Finder continues to drive the (r)evolution of high power print relays and now offers a new 68 series print relay with 2x 100 A switching capacity. More and more applications require a high and reliable switching capacity with a compact size at the same time. It is therefore not surprising that the new 68 series with the high-power print relay is primarily aimed at applications with intensive switching capacity.

Classic application areas are high power applications such as photovoltaic systems, battery chargers, power generators, pump control, inverters, elevators and electric charging stations as well as HPC chargers. Finder recognized the need for these special requirements when it developed the product. The new 68 series is a one hundred percent in-house development from Finder and is manufactured exclusively in Europe. This ensures the usual high product quality Made in Europe as well as short supply chains through an exclusively European production.

The high-power 68 series print relay offers 2x 100 A switching capacity. The rated voltage is 400 V AC to a maximum of 690 V AC. In accordance with VDE 0126-1-1, EN62109- and EN 62109-2, the contact opening is ≥ 3.6 mm. The electrical life at a switching load category AC7a is 30,000 operations. The coils have a 700mW holding power are thus highly sensitive for their power class and design. The insulation between coil and contacts is reinforced. The contact material is cadmium free. The almost cube-shaped and compact size has the dimensions 52.2 x 52.5 x 57.5 mm (WxDxH). The 68 series is suitable for use in ambient temperatures from -40 up to 85 C°. The heat and fire resistance complies with EN 60335-1.

Further technical information as well as data sheets can be found in our onlineshop.