Manufacturer: Lumberg Connect

With the Micromodul™ series, Lumberg offers connectors for indirect mating using insulation displacement technology (IDT) with a pitch of 1.27 mm. With four to 26 poles, undercoated and tin-plated contacts and closed side walls, it enables indirect connection of the ribbon cable to the counterpart on the PCB - a very space-saving and cost-effective solution.

Suitable for ribbon cables with a cross-section of 0.08 to 0.15 mm², can be connected using insulation displacement technology, can be used in a temperature range of -40 to +120 °C and with a rated voltage of 32 V AC, this series for indirect connection demonstrates its versatile and convenient range of applications for signal and low load currents up to 1.2 amperes.

An overview of the available types, further technical data and data sheets can be found in our online store.

The new JIS C 6560 JC35J3A jack chassis sockets are characterised by the use of optimised materials and fast availability.
 
Suitable for temperature ranges from -20 °C to +70 °C, up to 5000 mating cycles can be realised. The connectors are reliably held in place with a pulling force of 3-30 N.
 
The 3.5 mm couplings are available both as upright and angled versions for mounting on the PCB. This makes these connectors suitable for use in high-quality circuits and devices.
 
An overview of the orderable versions as well as further technical information is available in our online shop.

In the course of the continuous updating of our product range, you will find the Lumberg Connect Series 65 in our delivery portfolio with immediate effect.

The pluggable screw terminal blocks (KS / KSC) with 5.0 mm pitch are space-saving, hideaway and lockable. They have a wire protection and can be arranged without loss of pitch.

Corresponding counterparts for PCB mounting are available in straight (KB / KBQ) and angled versions (KBWO). These socket connectors are available with single or double row staggered solder pins.

The connector system can be used very flexibly thanks to available pole numbers from 2 to 10 poles and connection cross-sections of up to 4.0 mm². Load and signal currents of up to 10 A are no problem.

A UL/CSA approval rounds off the features of the Series 65.

Lumberg connect announces the discontinuation of the 2,5 MB and 2,5 MBPH series as of December 31, 2019.

Customers for these products will still have the opportunity until this date, to communicate their needs to us. The quantities quoted will then be taken into account during production.

Please also note that Lumberg Connect does not offer a replacement for these series in your planning.

Lumberg Connect GmbH announces the discontinuation of the product groups Multimodul 3810 and 3820/21.

The product group 3810 will be taken out of the assortment without replacement, whereas the group 3820 can be replaced by products of the series 3823. However, it has to be considered that these articles are equipped with crimp contacts and therefore additional production equipment may be necessary.

For both discontinued product groups, limited quantities are still available as a last-time-buy option from the manufacturer.

If necessary, contact your customer advisor.